SDP810-500PA

SDP810-500PA

Manufacturer:: SENSIRION

SENSIRION SDP810-500PA Digital & Analog Dual-output CMOSens Differential Pressure Sensor

Specifications

Product Introduction

The SDP800 sensor family is a series of digital differential pressure sensors designed for high-volume applications. These sensors measure the pressure of air and non-aggressive gases with high accuracy and no offset drift. They cover a pressure range of up to ±500 Pa (±2 inch H₂O / ±5 mbar) and deliver outstanding accuracy, even at the bottom end of the measuring range. The SDP800 Series features a digital 2-wire I2C interface, making it easy to connect directly to a microprocessor. The performance is based on patented CMOSens® sensor technology, which combines the sensor element, signal processing, and digital calibration on a small CMOS chip. The differential pressure is measured by a thermal sensor element using flow-through technology.

Features

  • Excellent repeatability, no drift, no offset
  • Extended feature set – smart averaging
  • Calibrated and temperature compensated
  • High reliability and long-term stability
  • Best signal-to-noise ratio
  • Industry-proven technology with a track record of more than 15 years
  • Designed for mass production
  • High process capability

Applications

  • High-volume OEM applications
  • Demanding and cost-sensitive applications
  • Pressure measurement of air and non-aggressive gases

Specifications Table

Measurement range -500 to 500 Pa
Zero point accuracy 0.1 Pa
Span accuracy 3% of reading
Zero point repeatability 0.05 Pa
Span repeatability 0.5% of reading
Span shift due to temperature variation < 0.5% of reading per 10°C
Offset stability < 0.05 Pa/year
Flow step response time (τ63) < 3 ms
Resolution 16 bit
Calibrated for Air, N₂
Media compatibility Air, N₂, O₂, non-condensing
Temperature compensation range -20 °C to +85 °C
Supply Voltage 2.7 to 5.5 V
Supply current (Measuring) 3.8 to 5.5 mA
Supply current (Idle state) 1.1 mA
Supply current (Sleep mode) 1 µA
Power-up time 25 ms
Soft reset time 2 ms
I2C SCL frequency 400 to 1000 kHz
Update rate differential pressure value (Continuous mode) 1800 to 2200 Hz
Update rate temperature value (Continuous mode) 112.5 Hz
Measurement time (Triggered mode) 40 to 50 ms
Allowable overpressure 1 bar
Rated burst pressure 5 bar
Weight 6 g
Supply Voltage (Absolute max) -0.3 to 5.5 V
Max Voltage on pins (SDA, SCL) -0.3 to VDD + 0.3 V
Input current on any pin ±70 mA
Operating temperature range -40 to +85 °C
Storage temperature range -40 to +85 °C
Max humidity for long term exposure 40°C dew point
ESD HBM (human body model) 2 kV

To learn more, please download the PDF.

Datasheet: